|
|
|
This special table, for surgery of animals weighing up to 500 pounds, was designed with the assistance of the veterinary staff at the University of California-Davis. The table top is fabricated with 1/4" thick aluminum measuring 24x62". The top can be raised, lowered or tilted by four 12 volt actuators which are activated by two toggle switches. The table can be raised from 16" to 39" in approximately 15 seconds. The frame is constructed of 2 1/2 x 1 1/2" steel tubing, and the lifting arms of 5/8" steel, stainless shafts and bronze bushings.
A separate IV holder (A) and holder
socket are provided. A variety of leg supports (B) fit into two 8x24"
leg platforms (C). The platforms fit into pockets in various
locations on
the sides, and end of the table. A head board side extension (D) measuring
15x16" fits into slots located on the removable head board (E) which
All steel parts are powder coated and all hardware/attachments are stainless steel or aluminum. Power is supplied by a heavy duty 12 volt battery located in a water-proof box under the table. A battery charger is used to recharge the table as necessary. The table with accessories weighs approximately 500 lbs. Please contact us for a quotation.
|
An overhead framework
for dorsal position
arthroscopic surgery is available. The adjustable and removable framework
can also be used for an IV holder. Dorsal
support is available with two 8" wide sections which can be hand-cranked to
different angles. An optional waterbed mattress is available.
secures to either end of the table and measures 15x22". Portability is provided by four soft-tread wheels rated at 400 lbs.
each. The table can be moved to various locations with the use of
push/pull handles (F), even over rough surfaces. Hand brakes located on
the wheels secure the table into position. An animal can be transported to
the recovery area, and gently slid off the table after one end has been
lowered.